2023

102. " Optimization of high alumina slag practice in blast furnace ironmaking: an industrial approach (PART 1: fundamental aspects) ", S. Hazra, S. Pal, D.D. Biswajeet, M. Sahoo, G.S. Tarachand, D. Bhattacharyya, S. Nag, S. Seetharaman Journal of Ironmaking and Steelmaking 50, 1-14 (2023) Link to Full paper

101. " Molecular dynamics simulation for radiation response of Nb bicrystal having Σ 13, Σ 29, and Σ 85 grain boundary ", M. Manna, S. Pal, Journal of Applied Physics 133, 165902 (2023) Link to Full paper

100. " Molecular dynamics study of nano-indentation deformation behavior of Al/Al90Sm10 nanolaminate ", S. Mishra, S. Pal, Journal of Molecular Modeling, (2023) Link to Full paper

99. " An overview of mechanical properties and failure mechanism of FRP laminates with hole/cutout ", S. Gupta, S. Pal, B.C. Ray, Journal of Applied Polymer Science, (2023) Link to Full paper

98. " Atomistic insight of torsional behavior of CNT-nanocrystalline Al nanocomposites ", P.N. Babu, B.S.K. Gargeya, B.C. Ray, S. Pal, Diamond and Related Materials, (2023) Link to Full paper

2022

97. " Investigation of point defect evolution and Voronoi cluster analysis for magnesium during nanoindentation. ", P. Goswami, S. Pal, M. Gupta, Journal of Magnesium and Alloys, (2022) Link to Full paper

96. " Dislocation entangled mechanisms in cu-graphene nanocomposite fabricated by high-pressure sintering. ", N. Khobragade, T. Maity, A. Świderska-Środa, G. Stanislaw, W. Łojkowski, P. N. Babu, S. Pal, D. Roy, Materials Characterization, 112524. (2022) Link to Full paper

95. " Molecular dynamics simulation on creep-ratcheting behavior of columnar nanocrystalline aluminum. ", P. N. Babu, S. Pal (corresponding author), Journal of Molecular Graphics and Modelling, 108376. (2022) Link to Full paper

94. " Improvement in radiation resistance of nanocrystalline Cu using grain boundary engineering: an atomistic simulation study. ", M. Manna, S. Pal (corresponding author), Journal of Materials Science, 1-14. (2022) Link to Full paper

93. " Atomistic assessment of structural evolution for magnesium during hypervelocity nanoprojectile penetration. ", P. Goswami, M. Gupta, S. Pal (corresponding author), Journal of Molecular Modeling, 28(11), 1-11 (2022) Link to Full paper

92. " An analysis on tensile and flexural loading response for unidirectional CFRP laminate with cutout/hole: Geometrical design effect on the material strength. ", S. Gupta, , S. Pal, & , B. C. Ray, Journal of Applied Polymer Science, e53139 (2022) Link to Full paper

91. " Tailoring structural inhomogeneities in Al90Sm10 metallic glass nanowire via torsional deformation ", S. Mishra, S. Pal (corresponding author), Journal of Non-Crystalline Solids, Vol 595 (2022) Link to Full paper

90. " Improving thermal stability and Hall-Petch breakdown relationship in nanocrystalline Cu: A molecular dynamics simulation study ", S. Pal (corresponding author), K. Vijay Reddy, C. Deng, Materials Letters, Vol 324 (2022) Link to Full paper

89. " Small-scale deformation behaviour of the AlCoCrFeNi2.1 eutectic high entropy alloy ", Shailesh Kumar Singh, Govind Kumar, Pokula Narendra Babu, Snehanshu Pal, Saurabh Vashistha, M. S. Azam & Saurabh Dixit, Philosophical Magazine, (2022) Link to Full paper

88. "Generative Adversarial Networks for Noise removal in Plain Carbon Steel Microstructure images", A. Panda, R. Naskar and S. Pal , IEEE Sensors Letters, (2022) Link to Full paper

87. "Atomistic Insight into the Texture Weakening and Shear-Shuffle Twinning Mechanism During Cold-Rolling of Magnesium", K. V. Reddy, S. Pal (corresponding author), JOM, (2022) Link to Full paper

86. "Amorphous Intergranular Film Effect on the Texture and Structural Evolution During Cold-Rolling of Nanocrystalline Ni–Zr Alloys", K. V. Reddy, T. J. Rupert, S. Pal (corresponding author), Metallurgical and Materials Transactions A, (2022) Link to Full paper

2021

85. "Stable nanocrystalline structure attainment and strength enhancement of Cu base alloy using bi-modal distributed tungsten dispersoids", D. Roy, S. Pal, C. S. Tiwary, A. K. Gupta, P.N. Babu, R. Mitra, Philosophical Magazine, (2021) Link to Full paper

84. "Ab-initio investigation of structural, mechanical, thermodynamic, electronic, magnetic and thermoelectric properties of half-metallic d0 half-Heusler alloys LiXSi (X=Ca, Sr)", A. R. Mishra, S. Pal, (corresponding author), Journal of Solid State Chemistry, pp. 122610-1, (2021) Link to Full paper

83. "Impact of crystalline–amorphous interface on shock response of metallic glass Al90Sm10crystalline Al nanolaminates", S. Mishra, K. V. Reddy, S. Pal, (corresponding author), Applied Physics A, Vol 127, (2021) Link to Full paper

82. "Investigation of structural evolution in the Cu–Zr metallic glass at cryogenic temperatures by using molecular dynamics simulations", A. A. Deshmukh, J. G. Bhatt, P. M. Gade, S. Pal, , Journal of Molecular Modeling, Vol 27, (2021) Link to Full paper

81. "Correlation and Optimization of Phosphorus Content in Liquid Steel with Turndown Temperature and FeO Content in Slag for Steel Making by LD Converter by Implementing Multi-Objective Evolutionary and Genetic Algorithms", M, K. Singh, C. Halder, S. Dixit, S. Pal, , IIM Transactions,(2021) Link to Full paper

80. "Investigation of lanthanide complexation with acetohydroxamic acid in nitrate medium: experimental and DFT studies", A. Pati,A. Bhattacharyya, P.K. Pujari, S. Pal, T. K. Kundu r, Journal of Chemical Sciences, Vol. 133,(2021) Link to Full paper

79. "Cold-rolling induced residual stress effect on the shock response of crystalline-metallic glass (Cu–CuZr) nanolaminates by molecular dynamics simulation", K. Vijay Reddy, S. Pal, (corresponding author), Materials Chemistry and Physics, vol. 272, (2021) Link to Full paper

78. "Recreating the shear band evolution in nanoscale metallic glass by mimicking the atomistic rolling deformation: a molecular dynamics study", K. Vijay Reddy, S. Pal, (corresponding author), Journal of Molecular Modeling, vol. 27, (2021) Link to Full paper

77. "Atomistic simulation of crack propagation in CNT reinforced nanocrystalline aluminum under uniaxial tensile loading", P. N. Babu, S. Dixit, S. Pal, (corresponding author), Philosophical Magazine, (2021) Link to Full paper

76. "First-principles calculations to investigate electronic structure and magnetic, mechanical and thermodynamic properties of d0 half-Heusler LiXN (X= Na, K, Rb) alloys", A. R. Mishra, S. Pal, (corresponding author), Solid State Sciences, (2021) Link to Full paper

75. "Effect of variation in inclination angle of Ʃ5 tilt grain boundary on the shock response of Ni bicrystals", T.Konnur, K. V. Reddy, S. Pal, (corresponding author), Applied Physics A, 127, 358 (2021) Link to Full paper

74. "The spectrum of atomic excess free volume in grain boundaries", S. Pal, K. V. Reddy, T. Yu, J. Xiao, C. Deng, Journal of Materials Science, Vol. 56, pp. 11511–11528 (2021) Link to Full paper

73. "Constant twist rate response of symmetric and asymmetric Σ5 aluminium tilt grain boundaries: molecular dynamics study of deformation processes, " B. S. K. Gargeya, P. N. Babu, S. Pal (Corresponding Author), Journal of Materials Science, Vol. 56, pp. 8544–8562 (2021) Link to Full paper

2020

72. " Bi-objective Optimization of Maraging Steel Produced by Vacuum Induction Melting Using Evolutionary Algorithms, " C. Halder, L. P. Kuppili, S. Dixit, S. Pal, S. K. Jha, Transactions of the Indian Institute of Metals, (2020) Link to Full paper

71. " Strength degradation and fractographic analysis of carbon fiber reinforced polymer composite laminates with square / circular hole using scanning electron microscope micrographs, " S. Gupta, R. K. Prusty, B. C. Ray, S. Pal, Journal of Applied Polymer Science, (2020) Link to Full paper

70. " Molecular dynamics simulation-based study of creep–ratcheting behavior of nanocrystalline aluminum, " P.N. Babu, C.S Becquart, S Pal (Corresponding Author), Applied Nanoscience, (2020) Link to Full paper

69. " Atomistic Simulation of Nano-Rolling Process for Nanocrystalline Tungsten ", K.V. Reddy, S. Pal (Corresponding Author), JOM : Journal of The Minerals, Metals, and Materials, (2020) Link to Full paper

68. " Influence of rolling temperature on the structural evolution and residual stress generation of nanocrystalline Nickel during nano-rolling process ", K.V. Reddy, S. Pal (Corresponding Author), Computational Materials Science, Vol. 184, pp. 109935-1 (2020) Link to Full paper

67. " Dynamic probing of structural evolution for Co50Ni50 metallic glass during pressurized cooling using atomistic simulation ", A. A. Deshmukh, S. Pal (Corresponding Author), Journal of Molecular Modeling, Vol. 26 (2020) Link to Full paper

66. " Accumulative roll bonding of Cu–Zr nanolaminate: Atomistic-scale investigation of structural evolution and grain orientation scatter dependence on rolling parameters ", K.V. Reddy, S. Pal (Corresponding Author), Journal of Applied Physics, Vol. 127, pp. 154305-1 (2020) Link to Full paper

65. " A potential insight into the serration behaviour of Σ3n (n≤3) boundaries in Alloy 617 ", P. Bhuyan, K.V. Reddy, S.K. Pradhan, S. Pal, R.Mitra, S. Mandal, Materials Chemistry and Physics , Vol. 248, pp. 122919-1 (2020) Link to Full paper

64. " Zr segregation in Ni–Zr alloy: implication on deformation mechanism during shear loading and bending creep ", S. Pal (Corresponding Author), K. Vijay Reddy, D. E. Spearot, Journal of Materials Science, Vol.55, pp. 1-15 (2020) Link to Full paper

63. " Molecular Dynamics simulation based investigation of possible enhancement in strength and ductility of nanocrystalline aluminum by CNT reinforcement ", S. Pal (Corresponding Author), P. Narendra Babu, B.S.K.Gargeya, C. S.Becquart, Materials Chemistry and Physics, Vol.243, pp. 122593-1 (2020) Link to Full paper

2019

62. " Structure prediction of multi-principal element alloys using ensemble learning", A. Choudhury, T. Konnur, P.P. Chattopadhyay, S. Pal (Corresponding Author), Engineering Computations, Vol 37, pp. 1003-1022 (2019) Link to Full paper

61. " Shock velocity-dependent elastic-plastic collapse of pre-existing stacking fault tetrahedron in single crystal Cu", K. Vijay Reddy, S. Pal (Corresponding Author), Computational Materials Science, Vol. 172, pp. 109390-1 (2019) Link to Full paper

60. "Atomistic study of fracture behavior of metallic glass fiber reinforced metal-matrix nanocomposite during bending creep deformation process", K. Vijay Reddy, S. Pal (Corresponding Author), International Journal of Materials Research, Vol. 12, pp. 1142-1149 (2019) Link to Full paper

59. " Quantum chemical calculation based investigation of synergistic chelating between multiple Hydroxyamide ligands and La3+ ion ", Anindita Pati,T.K.Kundu, S. Pal, Computational and Theoretical Chemistry, Vol. 1170, pp. 112643-1 (2019) Link to Full paper

58. "Intensification of shock damage through heterogeneous phase transition and dislocation loop formation due to presence of pre-existing line defects in single crystal Cu", K. Vijay Reddy, C. Deng, S. Pal (Corresponding Author), Journal of Applied Physics, Vol 126, pp. 174302-1 (2019) Link to Full paper

57. "Atomistic investigation of the deformation mechanisms in nanocrystalline Cu with amorphous intergranular films", A. H. Neelav, S. Pal, C. Deng, Journal of Applied Physics, Vol 126, pp. 125101-1 (2019) Link to Full paper

56. "Dynamic formation and destruction process of stacking fault tetrahedra in single-crystal Ni during nanoscale cryo-rolling", K. Vijay Reddy, S. Pal (Corresponding Author), Philosophical Magazine Letters, Vol. 99, pp. 253-1, (2019) Link to Full paper

55. "Investigation of reorganization of a nanocrystalline grain boundary network during biaxial creep deformation of nanocrystalline Ni using molecular dynamics simulation" S. Pal (Corresponding Author), Md. Meraj, Journal of Molecular Modeling, Vol. 25, pp. 282-1 (2019) Link to Full paper

54. "Restriction of grain growth of nano-crystalline Ni-Zr alloy by Zr atoms segregated at grain boundary under high temperature intermittent stressing" Mishra, S. Pal (Corresponding Author), Molecular Simulation, Vol. 45, pp. 1465 ( 2019) Link to Full paper

53. "Nano-rolling: Roller Speed-Dependent Morphological Evolution and Mechanical Properties Enhancement in Nanoscale Mg" K. Vijay Reddy, S. Pal (Corresponding Author), JOM, Accepted ( 2019) Link to Full paper

52. "On the role of Cu-Zr amorphous intergranular films on crack growth retardation in nanocrystalline Cu during monotonic and cyclic loading conditions" S. Pal (Corresponding Author), K. Vijay Reddy, C. Deng, Computational Materials Science, Vol. 169, pp. 109122-1 ( 2019) Link to Full paper

51. "Molecular Dynamics Simulation Study of Uniaxial Ratcheting Behaviors for Ultrafine-Grained Nanocrystalline Nickel" S. Pal (Corresponding Author), K. Gururaj, Md. Meraj, and R. G. Bharadwaj, Journal of Materials Engineering and Performance, Vol. 28, pp. 4918 ( 2019) Link to Full paper

50. "Molecular dynamics simulation based investigation of strain induced crystallization of nickel metallic glasss" K. Vijay Reddy, Md. Meraj, S. Pal (Corresponding Author), Materials Chemistry and Physics, Vol. 237, pp. 121831-1 ( 2019) Link to Full paper

49. "Dynamic Characterization of Shock Response in Crystalline-Metallic Glass Nanolaminates" K. Vijay Reddy, C. Deng, S. Pal (Corresponding Author), Acta Materialia, Vol. 164, pp. 347-361 ( 2019) Link to Full paper

48. "Evaluation of glass forming ability of Zr–Nb alloy systems through liquid fragility and Voronoi cluster analysis" K. Vijay Reddy, S. Pal (Corresponding Author), Computational Materials Science, Vol. 158, pp. 324-332( 2019) Link to Full paper

47. "Structural evolution and dislocation behaviour during nano-rolling process of FCC metals: A molecular dynamics simulation based investigation", K. Vijay Reddy, S. Pal (Corresponding Author), Journal of Applied Physics, Vol. 125, 095101 (2019) Link to Full paper

46. "Computer vision approach for phase identification from steel micro-structure", A. Choudhury, R. Naskar, A Basumallick, S. Pal (Corresponding Author), Engineering Computations, Vol. 36, pp. 1913 (2019) Link to Full paper

45. "Optimization between Tundish Temperature and Slab Exit Temperature to Eliminate “Strand Stuck‐Up” Phenomenon in Continuous Casting Process of Steel by Implementation of Multi‐Objective Evolutionary and Genetic Algorithm", S. Pal (Corresponding Author), K. K. Behera, P. R. Padhee, S. Sarkar, and C. Halder, Steel Research International, Vol. 90, pp. 1800506-1 (2019) Link to Full paper

44. "Structural evolution and dislocation behaviour study during nanoindentation of Mo20W20Co20Ta20Zr20 high entropy alloy coated Ni single crystal using molecular dynamic simulation", D. K. Mishra, Md. Meraj, S. K. BadJena, S. Pal (Corresponding Author), Molecular Simulation, Vol. 45, pp. 572 (2019) Link to Full paper

43. "A Deep Learning Approach for Segmentation of Plain Carbon Steel Microstructure Images", A. Panda ; R. Naskar ; S. Pal (Corresponding Author), IET Image Processing, Vol.13, pp. 1516 (2019) Link to Full paper

42. "Influence of Stress on Creep Behavior of Ni60Zr40 Glass-Reinforced Ni Nanocomposite Investigated by Atomistic Simulations", S. Pal (Corresponding Author), M . Meraj, S. Mishra, and B. C. Ray, Transactions of the Indian Institute of Metals, Accepted (2019) Link to Full paper

41."Dynamic probing of structural evolution of single crystal Fe during rolling process using atomistic simulation", K. Vijay Reddy, S. Pal (Corresponding Author), Steel Research International, Vol. 90, pp. 1800636-1 (2019) Link to Full paper

2018

40. "Data‐Driven Bi‐Objective Genetic Algorithms EvoNN Applied to Optimize Dephosphorization Process during Secondary Steel Making Operation for Producing LPG (Liquid Petroleum Gas Cylinder) Grade of Steel", D. Bhattacharyya, P. R. Padhee, P. K. Das, C. Halder, S. Pal (Corresponding Author), Steel research International, Vol. 89, pp. 1800095-1 (2018) Link to Full paper

39. "Stress-induced solid-state amorphization of nanocrystalline Ni and NiZr investigated by atomistic simulations", M. Meraj, C. Deng, S. Pal (Corresponding Author), Journal of Applied Physics, Vol. 123, pp. 044306 (2018) Link to Full paper

38. "Effect of grain boundary complexions on the deformation behavior of Ni bicrystal during bending creep", K. Vijay Reddy, S Pal (Corresponding Author), Journal of Molecular Modeling, Vol. 24, pp. 87 (2018) Link to Full paper

37. "Influence of Grain Boundary Complexion on Deformation Mechanism of High Temperature Bending Creep Process of Cu Bicrystal", K. Vijay Reddy, S. Pal (Corresponding Author),Transactions of the Indian Institute of Metals , Vol.71, pp 1721 ( 2018) Link to Full paper

36. "Atomistic simulation study of influence of Al2O3–Al interface on dislocation interaction and prismatic loop formation during nano-indentation on Al2O3-coated aluminum", S. Mishra, M . Meraj, S. Pal (Corresponding Author), Journal of Molecular Modeling, Vol. 24, pp. 167-1 ( 2018) Link to Full paper

35. "On the comparison of interrupted and continuous creep behaviour of nano-crystalline copper: A molecular dynamics approach", S. Pal (Corresponding Author), S. Mishra, M . Meraj, A. K. Mondal and B. C. Ray, Materials Letters, Vol. 229, pp. 256-260 (2018) Link to Full paper

34. "Variation of glass transition temperature of Al90Sm10 metallic glass under pressurized cooling", S. Mishra , S. Pal (Corresponding Author), Journal of Non-Crystalline Solids, Vol. 500, pp. 249-259 (2018) Link to Full paper

33. "Analysis of deformation behaviour of Al–Ni–Co thin film coated aluminium during nano-indentation: a molecular dynamics study", K. Vijay Reddy, S. Pal (Corresponding Author), Molecular Simulation , Vol. 44, pp. 1393-1401 (2018) Link to Full paper

32. "Influence of dislocations, twins, and stacking faults on the fracture behavior of nanocrystalline Ni nanowire under constant bending load: a molecular dynamics study", K. Vijay Reddy, S. Pal (Corresponding Author), Journal of Molecular Modeling, Vol. 24:277, pp. 1-11 ( 2018) Link to Full paper

31. "Exponential linear unit dilated residual network for digital image denoising," A. Panda, R. Naskar and S. Pal, Journal Electronic Imaging 27(5), pp. 053024 (2018) Link to Full paper

30. "Dislocation Interaction and V-Shaped Growth of the Distorted Structure During Nanoindentation of Cu20Ni20Al20Co20Fe20 (high-entropy alloy)-Coated Copper: A Molecular Dynamics Simulation-Based Study," D. K. Mishra, Md. Meraj, S. K. BadJena, S. Pal (Corresponding Author), Transactions of the Indian Institute of Metals , Accepted ( 2018) Link to Full paper

2017

29. "Effect of Zr addition on creep properties of ultra-fine grained nanocrystalline Ni studied by molecular dynamics simulations", S. Pal (Corresponding Author), M. Meraj, C. Deng, Computational Materials Science, Vol. 126, pp. 382—392 (2017) Link to Full paper

28. “Comparative creep behaviour study of single crystal Ni and nano crystalline Nickel in presence of porosity at 1120K”, M. Meraj, S. Pal (Corresponding Author), Metallurgical Research and Technology, Vol. 114, pp. 107 (2017) Link to Full paper

27. “Influence of Carbon Equivalent Content on Phase Transformation during Intercritical Heating of Dual Phase Steels using Discrete Micro-scale Cellular Automata Model”, K. Vijay Reddy, C. Halder, S. Pal (Corresponding Author), Transactions of the Indian Institute of Metals, Vol. 70, pp. 909–915 (2017) Link to Full paper

26. “Prediction of nitrogen content of steel melt during stainless steel making using AOD converter”, S. Patra, J. Nayak, L. K. Singhal, S. Pal(Corresponding Author),Steel Research International (DOI:10.1002/srin.201600271) (2017) Link to Full paper

25. "The effect of temperature and stress on creep behavior of ultra-fine grained nano crystalline Ni-3 at% Zr alloy", M Meraj, S. Pal (Corresponding Author), Metals and Materials International, Vol. 23, pp. 272-282 ( 2017) Link to Full paper

24. "Healing Mechanism of Nanocrack in Nanocrystalline Metals during Creep Process", M. Meraj, S. Pal (Corresponding Author), Applied Physics A, Vol. 123, pp. 138 (2017) Link to Full paper

23. "Experimental and Theoretical Studies on the Viscosity–Structure Correlation for High Alumina-Silicate Melts", T. Talapaneni, N. Yedla, S. Pal, S. Sarkar, Metallurgical and Materials Transaction B, Vol. 48, pp. 1450-1462 (2017) Link to Full paper

22. "Mechanistic study of bending creep behaviour of bicrystal nanobeam" K. Vijay Reddy, M Meraj, S Pal (Corresponding Author), Computational Materials Science, Vol. 136, pp. 36—43 (2017) Link to Full paper

21. "Contribution of Nb towards enhancement of glass forming ability and plasticity of Ni-Nb binary metallic glass" K. Vijay Reddy, S. Pal (Corresponding Author), Journal of Non-Crystalline Solids, Vol. 471, pp.243-250 (2017) Link to Full paper

20. "Presence of retained crystalline seed necessary for bicrystal-liquid-bicrystal phase transformation", K. Vijay Reddy, Md. Meraj, S. Pal (Corresponding Author), Journal of Crystal Growth , Vol. 475, pp.307-315 (2017) Link to Full paper

19. " AA6082 to DX56-Steel Laser Brazing: Process Parameter–Intermetallic Formation Correlation", D. Narsimhachary, S. Pal, S. M. Shariff, G. Padmanabham, A. Basu, Journal of Materials Engineering and Performance, Vol. 26, pp.4274-4281 (2017) Link to Full paper

18. " Nano-scale simulation based study of creep behavior of bimodal nanocrystalline face centered cubic metal", Md. Meraj, S. Pal (Corresponding Author), Journal of Molecular Modeling, Vol. 23, pp.309 (2017) Link to Full paper

17. " Influence of Asymmetric Cyclic Loading on Structural Evolution and Deformation Behavior of Cu-5 at.% Zr Alloy: An Atomistic Simulation-Based Study", Md. Meraj, K. Dutta, R. Bhardwaj, N. Yedla, V. Karthik and S. Pal(Corresponding Author), Journal of Materials Engineering and Performance, Vol. 26, pp.5197-5205 (2017) Link to Full paper

16."Processing and refinement of steel microstructure images for assisting in computerized heat treatment of plain carbon steel", S Gupta, A Panda, R Naskar, D Mishra, S. Pal, Journal of Electronic Imaging, Vol. 26, pp.063010 (2017 ) Link to Full paper

2016

15. “Structural Evaluation and Deformation Features of Interface of Joint between Nano-Crystalline Fe-Ni-Cr Alloy and Nano-Crystalline Ni during Creep Process” S. Pal (Corresponding Author), M. Meraj, Materials and Design, Vol. 108, pp.168-182 (2016) Link to Full paper

14. “The effect of porosity and void on creep behaviour of ultra-fine grained nano crystalline nickel”, Meraj, N. Yedla and S. Pal (Corresponding Author), Materials Letters, Vol. 169, pp. 265-268 (2016) Link to Full paper

13. "Molecular Dynamics based Cohesive Zone Modelling of Al(metal)-Cu50Zr50 (metallic glass) interfacial mechanical behaviour and investigation of dissipative mechanism", Pradeep, S. Pal and N. Yedla, Materials and Design, Vol. 105, pp. 41- 50 (2016) Link to Full paper

12. “Optimization of phosphorous in steel produced by basic oxygen steel making process using multi-objective evolutionary and genetic algorithms” S Pal (Corresponding Author), C. Halder, Steel Research International (2016) DOI: 10.1002/srin.201600193 Link to Full paper

11. “Experimental and atomistic simulation based study of W based alloys synthesized by mechanical alloying”. A. Patra, M. Meraj, S. Pal, N. Yedla and S.K. Karak, International Journal of Refractory Metals and Hard Materials, Vol. 58, pp. 57-67 (2016) Link to Full paper

10. "Role of W on the Deformation behaviour of Ni-W Alloy under Tensile Followed by Compressive Loading" M Meraj, N. Yedla, S. Pal (Corresponding Author), Metals and Materials International, Vol. 22, pp. 373-382 (2016) Link to Full paper

9. “The Effect of Temperature on Creep Behaviour of Porous (1 at.%) Nano Crystalline Nickel”. M. Meraj and S Pal (Corresponding Author), Transactions of the Indian Institute of Metals, Vol. 69, pp. 277-282 (2016) Link to Full paper

8. “Electrophoretic deposition of Cu-SiO2 coatings by DC and pulsed DC for enhanced surface mechanical properties”, H.S. Maharana, S. Lakra, S. Pal, and A. Basu, Journal of Materials Engineering and Performance, Vol. 25, No. 1, pp. 327- 337(2016) Link to Full paper

7. “Surface-Mechanical Properties of Electrodeposited Cu-Al2O3 Composite Coating and Effects of Processing Parameters”. HS Maharana, A Ashok, S. Pal, A Basu. Metallurgical and Materials Transactions A, Vol. 47, pp. 388—399 (2016) Link to Full paper

6. "Effect of basicity, Al2O3 and MgO content on the characteristic temperatures of the CaO-MgO-SiO2-Al2O3 high alumina quaternary slag system". T. Trinath, N. Yedla, S. Sarkar, S. Pal, Metallurgical Research & Technology, Vol. 113(5), 501 (2016) Link to Full paper

2015

5. "Asymmetry in steel welds with dissimilar amounts of sulfur", H. L. Wei, S. Pal, V. Manvatkar, T. J. Lienert, and T. DebRoy. Scripta Materialia, Vol. 108, pp. 88- 91 (2015) Link to Full paper

4. “The effect of nano-void on deformation behaviour of Al-Cu intermetallic thin film compounds”, N. Yedla, M. Meraj, P. Gupta, V. Sarat, A. J. Kabi and S. Pal (Corresponding Author), Metallurgical Research & Technology, Vol. 112, pp. 505 (2015) Link to Full paper

2014

3. "Design of methane hydrate inhibitor molecule using Density Functional Theory." S. Pal (Corresponding Author) and T. K. Kundu, Journal of Cluster Science, pp. 26, No. 2, pp. 551-563(2014) Link to Full paper

2013

2. "Pentagonal dodecahedron methane hydrate cage and methanol system - an Ab initio study" by S. Pal (Corresponding Author), T. K. Kundu, Journal of Chemical Science, Vol. 125, pp. 379–385 (2013) Link to Full paper

1. "DFT based inhibitor and promoter selection criteria for pentagonal dodecahedron methane hydrate cage" S. Pal (Corresponding Author), T. K. Kundu, Journal of Chemical Science, Vol. 125, pp. 1259 -1266 (2013) Link to Full paper